[florencte24]

Eight Rod Bolts

[ArtForz]

One Gasket Kit [including 2 Head Gaskets, 2 Head Covers, 1 Base Gasket, 4 Reed Gaskets, 4 Carburetor to Silencer Gaskets, 3 Thermostat Gaskets, 1 Intake Gasket, 1 Air Silencer, 4 Bypass Covers, 1 Water Passage, 1 Exhaust Gasket, 1 Exhaust Plate, 2 Exhaust Covers, 1 Inner Exhaust, 4 Crank Cap O-Rings, 4 O-Rings, 1 Fuel Pump Mount, 1 Oil Seal, 1 Lower Crank Seal, 1 Upper Crank Seal, and 1 Spaghetti Seal] here

[marcusaurelius]

This rebuild kit is designed for use with Johnson/Evinrude 65-140 HP V4 Crossflow Powerheads from 1977 and Up. The kit includes the following:

[Renton777]

Four Pistons [Complete with rings, pins, and clips]

[Quantumplation]

Rod Bearings [Four Upper and Four Lower]

[Xaxo]

Main Bearings [One Upper, One Center, and One Lower] [links]

[Troutner]

©Copyright . Sterndrive Engineering Inc. All Rights Reserved. [links]

[M.I.]

The three year fault-free warranty covers any damage to the drive that requires it to be repaired or replaced including failures resulting from lack of oil, fishing line, impact, neglect, and other abuse. Sterndrive Engineering, Inc. (SEI) manufactures a stern drive designed to replace Mercury Marine's MerCruiser®, Alpha One®, R, MR, Gen II and Bravo One® stern drives. MerCruiser®, Alpha One®, Gen II, R, MR and Bravo One® are trademarks of the Brunswick Corporation. SEI has no affiliation with the Brunswick Corporation. Consequently, any warranties governing products manufactured and/or sold by Brunswick Corporation will not apply to products manufactured and/or sold by SEI, or to products damaged due to the operation of an SEI product. Sterndrive Engineering, Inc. is not affiliated with Mercury®; Yamaha®; OMC® or their products. All reference to their trademarks and trade names are the property of the respective owners.

[semyazza]

[links]

[Kalidratorma]

more

[kathybrendan962]

[links]

[enhytgb]

Sierra 18-2428 Trim Cylinder Repair Kit Sierra replacement trim cylinder repair kit for Mercruiser Stern Drives. Sierra's aftermarket engine components are manufactured to meet or exceed OEM. here

[Maxalu]

Sierra 18-2429 Mercruiser Power Trim Cylinder Repair Kit Sierra high-quality engine parts are designed to meet OEM Specifications. For Mercruiser Alpha One Gen II Drives. Interchangeable. more

[judcrews666]

Sierra 18-2082 Trim Seal Sierra replacement trim seal for Yamaha Outboards. Interchangeable with: Yamaha Outboard 64E-4384J-00-00 [links]

[playanaut]

Sierra 18-2291 Mercruiser Trim Cylinder Repair Kit Sierra high-quality engine parts are designed to meet OEM specifications. For all stern drive models: 120, 140, 160, 165, 888, 898, 228.

[srf21c]

Thank you so much. I have a very nice rebuilt and refinished 1977 115 but I would like to find a 1994 140 to get a little more power. Any Ideas where I can find one? Thanks again. I'm in Chicago. more

[Insti]

Re: What year was the Last V 4 140 HP 2 cycle Evinrude/Johnson? [links]

[Guillermo]

Outboard Motors
1977 EVINRUDE
140740

[Kristen8Fuller]

Hello, I went there and it was no help. Is there anywhere else I can go to find out outboard HP years available and engine weights?
Thanks

[mustvisit]

Powertech Propellers ELD3 Xtreme Value Series Stainless Steel Propellers for 40-140hp Evinrude, ETEC..

[narisseproe]

PowerTech Propellers RAF 3 Blade Stainless Steel Props for 40-140 HP Evinrude, E-Tec Outboard motors..

[Artefact2]

Solas Amita-4 Aluminum Propeller fits 40-140hp Evinrude Johnson Outboards & OMC Cobra 400 Sternd.. here