[stone]

This article was co-authored by Eric Shipe. Eric Shipe is a Kitchen and Bath Designer and the Owner of Bath + Kitchen based in Washington DC. Eric and his team specialize in cabinetry, design, and remodels. They serve homeowners, interior designers, architects, and contractors with a refined process, creative ideas, 4K photo-realistic renderings, and 360 Panoramic views. Bath + Kitchen was featured in Best of Houzz 2017-2020. Eric holds a BA in Economics and Business Administration from Ursinus College.

[cronicleu1]

There are 8 references cited in this article, which can be found at the bottom of the page.

[just a man]

Whether you are protecting your bathroom tiles or sealing a window, silicone sealant is the material to use. Though it is super versatile and can be used on a variety of surfaces, this type of sealant will not last forever. When your sealant starts to loosen, crack, or fall off, you'll need to scrape it out carefully with a utility knife or razor blade. here

[Karmicads]

until you rub it off or get blisters which ever comes first.. Nothing else will get it off trust me! This is why products like 5200 and Silicone are not allowed on or near my boat.

[cdb000]

Use LifeCaulk above the waterline and below to bed through hulls, instruments, winches, stanchions, etc. The product is very good, not permanent like 5200, and not shiney/greasy like silicon. I use Acetone to remove the silicon sheen. [links]

[bokab51]

Kerosene works well to remove the silicon also. [links]

[casey24lyn]

I'm with oops on this one. I just spent a few hours today with my grinder and a 40grit flapper disk. It takes a little finesse but you just keep working a small section at a time and it moves right along! Hope it helps! more

[caveden]

Re: Adheasive Remover - what is best on fiberglass? more

[mike_3296]

Re: Adheasive Remover - what is best on fiberglass?

[spidr_mnky]

a grinder works the best by far. more

[goldcoin]

If you have the right tools at your disposal, you won’t need to use figurative elbow grease to get the job done. In fact, it’s better for the underlying fiberglass if you’re able to remove old silicone effectively and without as much struggle. Not only will you stand a better chance at removing entire swaths of silicone at once, but you’ll save a lot of time and frustration along the way. more

[redroses]

In cases like hard stuck-on silicone, many boat owners will tell you that you’re in for a hefty bit of manual labor. This is known as the “elbow grease method.” In other words, they want you to use basic tools and scratch off the silicone yourself. The problem with this method isn’t only that it’s labor-intensive. If you use the wrong tools, it can also pose a risk to the quality of your gel coat and your fiberglass. more

[drwhite]

The key is to work slowly and deliberately, pulling back adhered silicone bit by bit until it comes off cleanly. This will help ensure an even look to your fiberglass underneath.

[w8ks6]

Removing silicone from a fiberglass boat can require a steady hand and specialized equipment. That’s why it’s imperative to procure a product specifically designed for gentle application and the removal of stuck-on materials like silicone. more