[Jenniferle]

A rare combination of luxury and superior performance in a power boat. EdgeWater is proud to introduce the exciting new 370CC. Built using Single-Piece Infusion, or SPI, enabled us to create a lighter, more efficient, more environmentally sensitive power boat. Interior cabin loaded with everything one would need for a couple’s getaway. Designed for fishing, entertaining, and cruising. The 370 is in class of its own and will satisfy the most discerning owner.

[estespark809]

At 9.2 pounds-per-horsepower, the 370cc boasts best in class. Boating Magazine, 370cc

more

[joeydangerous]

[parallel]

[mrorymolina1]

here

[loiskimberly]

[lowifi]

Gelcoat can be used to patch existing gel coat, fiberglass repairs, and new construction and projects. White gel coat, pre-colored gel coat, clear gel coat, neutral tintable gelcoats. This premium marine grade gel coat may be as gecloat for boats, gelcoat for pools or many other applications. These Premium Quality Isophthalic NPG gel coats are formulated to meet rigid requirements in the boating, transportation, and sanitary applications and have High UV resistance.

[garrett]

Fighting Lady Yellow Exterior Gel Coat that is Premium Professional Grade with superior leveling and air release for the. here

[matamotok]

Flame Red (Bright Red Orange) Exterior Gel Coat that is Premium Professional Grade with superior leveling and air releas. here

[Fox]

S2-FX43
Choose your locale: more

[friendsofkim]

S2-FX23
Choose your locale:

[jacobpayne]

S2-FX67
Choose your locale: [links]

[TORNS]

Looking for a natural, earthy finish for your kustom ride? Look no further than Shimrin2® FX Kosamene® Series. These earthy, fine-grain pearls are excellent for Air Brushing or fast coverage on graphics and more. With Kosamene, the kustom sky is the limit.

[tuxsoul]

1. Prep the area removing all of the damaged gel coat Keep the repair as small as possible. Prep the damaged area with 220 grit sand paper. Sand down any rough edges. A Dremel tool or die grinder can also be used to prep the damaged area. Cracks must be ground out prior to applying patch paste.

[marieellis444]

3. Mark the repair area with a grease pencil. This prevents over sanding. Sand the patch with a 220 grit sand paper. Sand only as much as necessary to remove the excess material and or the grease pencil's color. Keep the block or sander flat to prevent a wavy patch. Repeat process with 400 and 600 grit paper. [links]

[AgentME]

Here you can learn about what is needed to apply a Gel Coat.

[AgentME]

2. Begin by wiping the area clean with a acetone. Mix 10-12 drops of catalyst with 1 ounce(half a jar) of Spectrum Color factory color matched Patch Paste®. Fill the damaged area with the smooth drag. A second application may be necessary. After patch paste is cured, 1-2 hours sand and buff to finish. more