[Centaur]

• Make sure all propeller hardware is installed correctly. more

[fabianhjr]

• Engine manufacturer recommends greasing the propeller shaft every 12 months. more

[hilda4u]

• Prop installation, inspection and boat operation all need to be done in a safe and responsible manner. [links]

[tehlaser]

• ** Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware.

[RobHu]

Select from these Volvo Penta models to open detailed Solas propeller charts. All blade types, all possibilities, traditional pressed or modular rubber hubs. Prop shaft spline counts shown to help you find the right props. more

[vorale87]

Solas has aluminum, stainless, 3 and 4 blade options for Volvo drives. For counter-rotating DP280 and DP 290 drives, Solas makes front and rear Dual Props, again in either aluminum or stainless steel with pressed rubber hubs. For SX drives, a Rubex bronze core modular hub option is available. more

[specious]

[links]

[mixedunicc]

[merlenebarrettl]

3.0, 4.3, 5.0, 5.7 L 1994 & Newer
5.8 L 1994-97
7.4 L 1997 & Newer
8.2 L 1997
more

[gef]

Solas Amita-3 blade Aluminum Rubex Propeller: This 3-blade aluminum prop by Solas propellers has a wide blade designed for today’s 2-stroke & 4-stroke outboards (Mercury, Tohatsu, Yamaha, Honda & Suzuki) and outdrives (Alpha 1, Bravo-1, Bravo-2 & Volvo) for most motor boats on the water. Solas Propellers use a squeeze casting process to produce one of the best aluminum outboard propellers in the world and are available for just about all horse power ranges for today’s outboard motors and I/Os. Please contact www.getaprop.com today for the best aluminum Propellers on the market.

[Nerd]

Solas Amita offers S/S prop performance
Exclusive SOLAS squeeze casting process
Wide blade design
Suitable for high speed operation

[obinine]

Interchangeable Hub System
Thru-Hub Exhaust & 19 Tooth Spline
Requires RBX-105 Hub Kit (Not Included)

[joshg56]

Thru-Hub Exhaust
19 Tooth Spline
4.75" Gearcase
Requires RBX Hub Kit # 105 (Not Included) [links]

[Cruzz]

Each RUBEX Hub Kit comes with the hardware needed to install the propeller on the prop shaft. Unlike competitive hubs, the prop nut does not require periodic re-torquing on a RUBEX propeller system.
[links]

[TTBit]

Solas Hydro Propellers are 13.75" - 14.25" diameter available in pitch increments of 15, 17”, 19” and 21”. 3-blades, right- or left-handed rotation, this is a great all-around performance propeller with high performance geometry. Termed the Hydro series, these Solas props are similar to the Powertech RAS3 and Michigan Rapture. Available with the Square Hub design to receive the XHS or Flo-Torq hub kits.

[zbillyofreyc]

The Solas RUBEX Hydro stainless steel propellers have a rubber interchangeable hub system designed to eliminate chatter and vibration that competitive hub systems are prone to. Being rubber, the RUBEX hub has no plastics to deteriorate. It can deflect 10% for softer shifting and to reduce prop shaft shock when the propeller strikes a submerged object. The RUBEX hub will not spin in the propeller. more

[Jenniferle]

3.0, 4.3, 5.0, 5.7 L 1994 & Newer
5.8 L 1994-97
7.4 L 1997 & Newer
8.2 L 1997 more

[trellend]