PDA

See full version: Quicksilver Power Tune


db
01.06.2021 15:24:49

Quicksilver Power Tune is used to remove performance-robbing carbon build-up from the combustion chamber. This engine cleaner can be used in all 2- and 4-cycle carbureted and fuel-injected gasoline engines. Power Tune works to restore lost power due to carbon, gum, and varnish deposits that accumulate in the combustion chambers of gasoline engines. These deposits are the result of normal engine use, low temperature operation, and the use of some fuels. Removing these deposits helps improve fuel/air flow and overall engine performance. This product is safe for catalyzed engines. here


Alex
05.06.2021 19:11:53

[links]


phoebusg
06.06.2021 22:17:02

[links]


julia6roberts
21.06.2021 3:12:47


TodX
14.05.2021 19:34:37

more


aq8586
01.06.2021 15:24:49

Remove the motor's top cover. Pull up on the "Fast Idle" control. Spray the Power Tune into the carburetor throat. Shut the motor off. Remove the spark plug wires by twisting them and pulling straight up. Remove the spark plugs with a plug wrench. here


m0Ray
05.06.2021 19:11:53

Spray Power Tune into the plug bores. Allow the Power Tune to remain in place for an hour or more. Turn the flywheel by hand to distribute the Power Tune. [links]


bitwaffle
06.06.2021 22:17:02

Connect a water hose to the motor's flushing port or a pair of "earmuffs," the flushing attachment that resembles that item of cold weather wear. Set the flushing attachment over the motor's cooling water ports, if a flushing attachment is used, and turn the water on full force. Start the motor and allow it to idle until it reaches its reaches normal operating temperature. [links]


Pegasus-Rider
21.06.2021 3:12:47

Power Tune is proprietary engine cleaning product from Mercury Marine, the outboard motor maker. A spray-in engine cleaner, according to Mercury Marine's sales information, Power Tune is "a blend of solvents and oil designed for combustion chamber deposit removal." The process for application is similar to that for using fogging oil when preparing a motor for long-term storage, except that the fuel to carburetor is not shut down -- the motor is shut down manually after you spray the product into the carburetor.


WSDN
14.05.2021 19:34:37

Replace the spark plugs and reconnect the plug wires. Replace the motor cover. more


DJFC
20.04.2021 23:08:59

Spray it into air intake to clean combustion chamber and exhaust system. Mercury Power Tune is recommended to assist in restoring lost power due to carbon, gum and varnish deposits that accumulate in the combustion chambers of gasoline engines. These deposits are the result of normal engine use, low temperature operation and the use of some fuels. For use in all 2 and 4 cycle carburetored and fuel injected engines. Note: This is classed as a dangerous good and cannot be sent on a courier. Sorry but it is available for in-store pick up only.


ccdewsxx
16.05.2021 22:55:37

more


Minsc
18.06.2021 21:01:27


lysacor
14.05.2021 6:53:08

Re: Seafoam spray v. BRP engine tune v. Quiksilver power tune? more


cdb000
27.04.2021 2:39:20

Re: Seafoam spray v. BRP engine tune v. Quiksilver power tune?


telyni
26.04.2021 19:45:52

not sure about that stuff.


alexaverbuch
10.06.2021 2:17:03

for me it realy worked and the engine even sounded crisper [links]