[dishwara]

• ** Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware.

[jb55]

• Engine manufacturer recommends greasing the propeller shaft every 12 months. more

[Some Mouse]

• Prop installation, inspection and boat operation all need to be done in a safe and responsible manner. [links]

[bitk]

PowerTech Propellers MQF 3 blade stern lifting propellers are 13.75” diameter available in 13” and 15” pitch with right-hand rotation. Similar to the Mercury Black Max line of propellers, the PowerTech’s MQF is a stainless steel cupped propeller that provides excellent stern lift. This propeller is a great choice for work boats and pontoons requiring stern lift and low end thrust. With its large blade area, rake, and cup it efficiently carries heavier loads while still providing great top end performance and handling. The Powertech MQF comes with a factory pressed in OM140 rubber hub bushing, for mounting using your original OEM Evinrude Propeller hardware. more

[Bitcoinz]

OM-140 Hub Fitment (13 Tooth Spline)
40,50,55,60,75 HP (E-TEC) 2004 and Newer
45-65 HP Commercial 1980 and Newer
50-75 HP Pleasure 2 & 3 Cyl. 1968 and Newer
60 HP (4 Stroke) 1998 and Newer
70 HP (4 Stroke) 1998 and Newer
90,115,130 HP (E-TEC) 2004 and Newer
85 HP 1969-80 & 1991-95
88 HP 1981-96
90 HP 1981 & Newer
100 HP 1979-80 & 1988-93
110 HP 1986-89
112 HP 1994-96
115 HP 1973 & Newer
120 HP 1986-94
125 HP 1971-72
135 HP 1973-76
140 HP 1977-94

[tunixman]

NOTE: If you are not satisfied with your purchase within the first 30 days, we will exchange your propeller for a different pitch for a nominal fee.

[Necrathex]

[TranSlate]

The Powertech RED3 Propellers are a multi-purpose propeller for Class-D, 40-140HP Evinrude, E-Tec Outboards and has a constant 13.25-inch diameter regardless of pitch in 12 thru 21 inches of pitch. The RED3 has a high polished finish, in right and left-hand rotation with moderate rake and cup for good lift giving it great all-around performance. The RED is available in 3 or 4 blades and comes with a factory pressed in OM140 rubber hub bushing, for mounting using your original OEM Evinrude-Johnson or OMC Cobra 400 Propeller hardware.

[rodin]

40,50,55,60,75 HP (E-TEC) 2004 and Newer
45-65 HP Commercial 1980 and Newer
50-75 HP Pleasure 2 & 3 Cyl. 1968 and Newer
60 HP (4 Stroke) 1998 and Newer
70 HP (4 Stroke) 1998 and Newer
90,115,130 HP (E-TEC) 2004 and Newer
85 HP 1969-80 & 1991-95
88 HP 1981-96
90 HP 1981 & Newer
100 HP 1979-80 & 1988-93
110 HP 1986-89
112 HP 1994-96
115 HP 1973 & Newer
120 HP 1986-94
125 HP 1971-72
135 HP 1973-76
140 HP 1977-94 here

[denger]

NOTE: If you are not satisfied with your purchase within the first 30 days, we will exchange your propeller for a different pitch for a nominal fee. more

[AHZ]

more

[PulsedMedia]

The diameter of your prop can vary by up to 1/2" with no discernable change in performance.

[melinamoore373]

2-piece propellers perform the same as the 1-piece/fixed hub versions. here

[aisnake]

2-Piece propellers consist of the outer prop housing and a removable center hub. more

[sc8nt4u]

The removable hub easily slips into the outer piece, allowing you to have multiple props for different applications at a lower price. When the prop blades become worn or damaged they can be replaced while keeping the same hub piece. more