[左]

(At 90°F)
• Pot Life - 45 min
• Gel Time - 65 min
• Cure Time - 3.5 hr

[eedcvfrr]

EZ-Tex is an easy to use marine epoxy repair compound for use where a high strength, waterproof, permanent repair is needed.

[replicawatch]

This unique formula creates a tenacious bond to most surfaces - including fiberglass, gelcoat, aluminum, steel, bronze, and wood.
Its buttery consistency will not sag or shrink and is excellent for filling cracks, gouges and voids.
The 1:1 ratio makes mixing easy.
EZ-Tex can be sanded, drilled, tapped, sawed and painted once cured.

[DerrickEaton]

(At 70°F)
• Pot Life - 60 min
• Gel Time - 90 min
• Cure Time - 5.5 hr

[earleenproehl]

Heavy on the technical side.
(At 50°F)
• Pot Life - 2 hr
• Gel Time - 4.5 hr
• Cure Time - 24 hr [links]

[ElidiaI39]

Features —
• Easy to use 1:1 mix ratio repair compound for cracks, gouges, voids and holes
• Both components are the same consistency - makes for easy measuring and mixing
• High strength formula makes repairs permanent
• 100% waterproof when cured
• Can be used above and below the waterline
• Will not sag, shrink or run
• Max. working temp once cured is 150°F
• Available in 4 oz and 16 oz kits

[tadcroz81]

I used Pettit EXTex Marine Epoxy Repair compound to fill two crew holes in the transom of a boat to which a new transducer was being installed. The new 'ducer;s bracket did not match up with all of the previous screw holes and I needed a tough, watertight fix. My methodology for effecting such a repair includes drilling the existing hole out to four times the diameter needed After the 'pox cures, I drill for the new fastener and reinstall whatever it is that needs fastening.

[meldavies88]

In this case, I drilled out the two number 10 screw holes using a ½-inch bit and and filled them using Pettit EZTex. EZtex is a two-part product that is easy to mix since it blends at a1:1 ratio of epoxy to hardener. Other products mix at 3: 1 or 5: 1, and so are tough to mix accurately by the eyeball method in the field, and may fail more often as a result.

[konaya]

[Regent]

[cgrongs]

[links]

[snrlx]

[narisseproe]

EZ-Tex is an easy to use marine epoxy repair compound for use where a high strength, waterproof, permanent repair is needed. This unique formula creates a tenacious bond to most surfaces. Its buttery consistency will not sag or shrink and is excellent for filling cracks, gouges and voids. A 1:1 ratio makes mixing easy. EZ-Tex can be sanded, drilled, tapped, sawed and painted once cured.

[nadav001]

*Product images are for illustration purposes only and may not be an exact representation of the item. Please refer to item description.

[Galuel]

[sevyanfellow]

When it comes to marine paint, Pettit Paint is a top performer available in various types and finishes. Its antifouling bottom paints, topside paints, and varnishes are all environmentally friendly and provide lasting coverage. Wholesale Marine is a proud distributor of Pettit Paint products.

[Gooffy]

With all the different options available in marine paint, it can be somewhat confusing finding the right one for your specific needs. Pettit marine paint formulates paints for every marine need and Wholesale Marine carries them. Here are just a few of the formulas we carry:

[laczoka]

Wholesale Marine carries the EZ series of Pettit Paint. These formulas are specifically designed for bilge areas, deck, and cabin areas. Bilge areas are a high-performance area and the specifically formulated EZ Bilge is designed to withstand the constant wear and tear. Made to withstand the harsh effects of antifreeze, grease, gasoline, diesel fuel, and engine oil. EZ-Decks is a non-skid deck paint that is fade-resistant and extremely durable and made to withstand the outdoor elements day in and day out. Made to withstand mold and mildew the EZ Cabin coat is great indoor paint. This paint dries fast and adheres to glossy surfaces without the need for sanding. It is formulated for high humidity areas such as cabin interiors, cabinets, drawers, and closets.