[x86Daddy]

Suitable for freshwater and saltwater use on boats up to 7m.

[wizeman]

Includes warranty, with UK after-sales service support. more

[grifferz]

Equivalent thrust to replace 2HP petrol outboards.

[ellyka119]

How Long Can My Trolling Motor Run on a Battery Charge?

[letharion]

The amperage hour rating is a measure of how long the battery will supply consistent amperage to the motor. The higher the rating, the longer a battery will be able to power a motor. So what does this actually mean? It means that, for example, a 100 amperage hour battery would be able to supply 25 amps of power for 4 hours before running out. Or if your trolling motor was drawing less amps, let’s say 10, the battery could power the motor for 10 hours. It’s just that simple. more

[DevoJinx]

This is the second most common question people ask when shopping for a new trolling motor for their boat. And it is a very important question, since the size of the motor you choose will not only affect your boat’s speed, but also the length of time you can travel on a single battery charge. When trying to figure out how big a motor you need, remember that a motor’s power is rated by pounds of “thrust,” which tend to range from 30 pounds on the low end to 100 pounds on the high end.

[mybassfishing]

I have two boats, one ( A Gheenoe) lends itself to a clamp on; transom mount; remote control. The other boat (Carolina Skiff) could get by well with the same set-up. I use each boat during separate seasons, at separate locations. so, being able to move the TM back and forth would work well for me.

[davout]

Re: Clamp on; transom mount; remote controlled trolling motor? more

[kseistrup]

Now, can you guess what automatic transmission I had in my first car. an early 50's Chevy. Yep, it was a Power Glide. I guess my failing mind failed some more this morning. I remember calling it the Power SLIDE when I wanted to get away from a stop sign in a hurry.

[skinnyp83]

There are nine basic steps to mounting a trolling motor on a kayak. We’ll be focusing on the DIY side mount option for the trolling motor. First, you’ll need to buy the right trolling motor for your kayak. Here is a guide for choosing a kayak trolling motor. more

[FairUser]

During this step, the PVC pipe and the 2 x 6 piece of wood will need to be cut to length. Make sure to tailor the length of the 2 x 6 to your kayak width. Some kayaks will be wider, so measure and cut the 2 x 6 as needed. more

[joeydangerous]

Using both bar clamps, secure the wood to the 2″ PVC pipe that’s now running across the width of the kayak. Using the 1/2″ drill bit, drill two holes through the wood and 2″ PVC, and two holes through the wood and each 1-1/4″ PVC at the bottom. here

[eresearh]

Here are the cuts that should be made for this step: here