Ground Loop
09.06.2021 16:04:03
Suzuki Propeller Hardware Kit for use with the following 8-20 HP motors.OEM # 57630-93900.. [links]
See full version: Suzuki Propeller Hardware
Suzuki Propeller Hardware Kit for use with the following 8-20 HP motors.OEM # 57630-93900.. [links]
Suzuki Propeller Hardware Kit for 60-115 HP Suzuki Outboard Motors.OEM # 57630-95500 U-TYP..
Suzuki Propeller Hardware Kit for use with the following 50-115 hp Outboard motors.Includes - Castle.. more
Suzuki Propeller Hardware Kit for use with the following DF 140 Outboard motors.Includes - Castle nu.. more
Suzuki Propeller Hardware Kit for use with the following DF15A DF20A Outboard motors.Includes - Cast.. more
RBX125 Solas Rubex Hub System Suzuki DF50-DF115 HP Outboards.4.25" Gearcase15 Tooth SplineRBX-125 Hu..
The following charts are for reference only. The user assumes all responsibility for the use of this material. It is the responsibility of the user to verify the accuracy of this material before use.
TIGHTENING TORQUE CHART : For other bolts and nuts listed previously, refer to this chart here
If your engine will only reach the lower end of the rev range, say 5100 on an engine with a 5000-6000rpm range, then you are lugging the engine, putting too much load onto bearings and rods, using too much fuel, and you will reduce its serviceable life significantly. Not a good idea. more
It SHOULD be skimming the water surface. It SHOULD NOT be submerged under water and creating unnecessary drag.The anti-ventilation plate is the large plate immediately above the prop. It is sometimes referred to as the cavitation plate (wrong name!)
3. Finally, we find the optimum cruise speed for fuel economy and record the revs, speed and fuel economy at that point. [links]
It DOES involve a water test where we put the boat onto the plane and reach a good fast cruise speed, engine trimmed out to achieve optimum revs, and someone goes to the transom and looks over the back to see where the anti-vent plate is running compared to the water surface.
Is there a definitive diagram or help on this? more
I did the parts diagrams and that only shows 2. which is silly. because again, I found more than 2 on my own.
Ones I still need to find: [links]
I have the manual. which doesn't even show some I found. LOL. and that's with the supplemental pages.