[h_corey]

We touched on how important materials can be when looking at the guides on a rod, but the construction of the spinning rod in general is important. These types of rods can be made from three different types of materials including graphite, composite and fiberglass. Fiberglass is a really tough material. This makes the rod heavier and is much less sensitive than other materials. If you’re fishing with a fiberglass rod, chances are you’ll be feeling it after a whole day of fishing. Then we have spinning rods made out of graphite. These are incredibly light and sensitive but more touchy than fiberglass. You don’t want to be putting graphite rods near your car door, so keep them in your boat when travelling. more

[phoebusg]

You may have noticed in the comparison table above that most spinning rods for bass are around 6 to 7 feet in length. Having your rod at a comfortable length is very important. If not, it will take down your overall performance and making casting more difficult. A rods length should coordinate somewhat with your height. If you’re 5 foot tall, you don’t want to be fishing with a 7 foot rad. This will make casting, along with the rest of your fishing experience not as tiring and much more enjoyable. more

[TarotUnlimited]

You want to be sure the reel lockdown is made with metal or at least reinforced with metal. Reel seats that have plastic lockdowns break a lot easier, especially if you tighten then too much. You also have the choice of a split or full handle. That is purely a preference and is your choice on which you’d like to fish with. here

[nikileshsa]

The XR5 from Kalex is the perfect combination of spinning and casting rod. This rod features a lightweight design specifically balanced for accuracy and distance. This rod includes 24-ton high modulus graphite which results in super sensitivity. The titanium oxide inserts with stainless steel line guides are able to be used with all types of line, even braided line.

[hendi]

I'll begin with the obvious: the groundbreaking carbon-fiber rod blank that gives the CarbonLite its moniker. The carbon-fiber blank is every bit as responsive and durable as its graphite competitors. Though, if any skeptics out there would like a mental comparison, it equates to an eighty-five million modulus graphite blank. more

[Immanuel]

Debuting a few months ago, the CarbonLite is available in several one-piece spinning and casting models and boasts a myriad of characteristics that have become more popular over the last few months. From its handle material to its guides, the CarbonLite's features make it a force to be reckoned with and a treasure for any angler's collection. more

[coins]

Now, along with the powerful, yet sensitive carbon-fiber blank and comfortably durable split-grip handle, the CarbonLite utilizes guides comprised of stainless steel frames, with titanium carbide inserts, allowing them to withstand nearly anything you can put them through. Furthermore, the guides even possess a PVD (Physical Vapor Deposition) coating which make them smoother casting, as well as resistant to scratches and nicks. This makes the guides optimal strong enough to handle braided and fluorocarbon lines, but forgiving enough for the lightest of monofilaments. here

[splitpeamaster]

Over the years, graphite has come to be synonymous with strength and sensitivity, in regards to fishing rods. Brands such as St. Croix and G. Loomis, two companies known for some of the highest quality rods and warranties available, provide consumers with a wide variety of rods consisting of the best graphite money can buy. These companies may have some competition, however, in the form of Bass Pro Shops' revolutionary rod known as the CarbonLite.

[juliahollis89]

​Elite Spinning Rod
[links]

[eedcvfrr]

Top Editor's Pick#2 more

[trellend]

And this is where things start to get a bit complicated.

[zlavernenasho]

In The Bass Fishing Rods Category [links]

[hebrew15]

Ok, it may be hard, but it certainly isn’t impossible. You just need to pick the right gears with little patience and you are good to face-off this aggressive fish.

[kmac]

Over 400,000 products in the last five years have been donated to nonprofit youth organizations nationwide to help get more kids outside. Join the movement and pledge to take someone fishing.” [links]

[jef.blanc]

A portion of the donations will focus specifically on organizations that serve you from underprivileged, minority, and urban backgrounds who may not otherwise have access to the equipment or skills they need to begin fishing. more

[siuenhan88]

There’s no doubt that the experiences that Morris (who also owns Cabela’s) had fishing as a kid shaped the rest of his life and career and ultimately inspired arguably the most prominent outdoors brand in the country.

[qqvfredc]

-A Free Catch-And-Release Ponds: Kids can experience the excitement of fishing at in-store catch-and-release ponds and earn a free “First Fish Certificate” from FLW (Fishing League Worldwide) to celebrate their achievement. [links]

[zlavernenasho]

He’s incredibly philanthropic and has not only created thousands of jobs, but also given so much back to the Springfield, Missouri community where his corporation is headquartered.