[mena321]

Another common issue that you may need to troubleshoot is vibration. If you’re experiencing excessive vibration, you can start by checking the condition of the propeller. If you find any damage, you’ll need to remove it and bring it in for repair or possible replacement. If there’s no damage, the next step is to remove any seaweed or other debris that might have become entangled in it. While you’re at it, check the propeller shaft for damage. Once again, if you find damage, you’ll need to take it in for repairs. Lastly, tighten the motor mounting bolt and the steering pivot with a wrench. Restart the engine to see if the vibration has stopped. If not, it’s time to bring it in for an inspection. [links]

[HopeFlynn7x]

Your last step involves the spark plugs. Remove them with a spark plug wrench so you can inspect them. If they’re burned or cracked, you should replace them with the type of spark plug specified in your owner’s manual. You should also measure the spark plug gap with a wire thickness gauge to confirm the gap falls within the range listed for your model. Adjust it with a spark plug gap tool if necessary. When you’re done, reinstall each spark plug and place the caps back on.

[emj]

We hope these tips for troubleshooting your Yamaha 4-Stroke Motor have come in handy. If you’re still experiencing issues, please contact your local Yamaha Outboard Dealership. In the Miami area, contact Eric's Outboard Marine Service.

[Art Gallery]

If you don’t have a blown fuse, your next step is to check the battery. Be sure to safely disconnect the negative cable followed by the positive cable before you remove the battery from its housing. Carefully scrape away any corrosion on the battery terminals with a wire-bristle brush. Take the time to clean off any other debris or buildup with a solution of one cup of water and one tablespoon of baking soda. Don’t forget to completely dry the terminals with a clean towel when you’re finished. more

[migrainerelief4]

If the battery is damaged, you should replace it. If not, you can proceed to charge it. When it’s completely charged, reinstall the battery and cables. Remember to connect the positive first and the negative second. Once that’s done, you can try the Yamaha outboard’s starter again. If it’s still not starting, you’ll want to consult a professional to inspect the electrical system. Your friends at Eric’s Outboard Marine would be happy to help. You can count on our Yamaha Certified Master Technicians to get to the bottom of it. more

[romkyns]

If you’re experiencing issues with the engine starting or running, there are some troubleshooting steps you can try. First, check the fuel system to ensure there is enough fuel in the tank. If the levels are low, refuel it with the appropriate gasoline for your model. Next, check the fuel lines that connect the Yamaha outboard motor to the fuel tank. If you find any breaks or leaks, you should stop using the engine. You’ll want a professional to handle this as soon as possible. here

[DanielLeerasiri]

Seriously if no spark get in touch with you marine serviceman who will diagnose the fault. more

[Bruce Wagner]

Might sound dumb, but is there enough charge in your battery? here

[TigerWolf]

You can remove all fuel filters and clean them throughly, then drain both fuel tanks. Then put a quarter of a tank of new fuel in one tank refit filters bring up pressure in the fuel bulb and try cranking it over. [links]

[Alex]

Everyone's just winging it. more

[Madoff]

If you are on a personal connection, like at home, you can run an anti-virus scan on your device to make sure it is not infected with malware. more

[logicerr]

If you are at an office or shared network, you can ask the network administrator to run a scan across the network looking for misconfigured or infected devices. here

[NickB]

Another way to prevent getting this page in the future is to use Privacy Pass. You may need to download version 2.0 now from the Chrome Web Store. [links]

[ravi2010]

Completing the CAPTCHA proves you are a human and gives you temporary access to the web property. more

[Vladimir]

If you are on a personal connection, like at home, you can run an anti-virus scan on your device to make sure it is not infected with malware. more

[Pegasus-Rider]

If you are at an office or shared network, you can ask the network administrator to run a scan across the network looking for misconfigured or infected devices. here

[nofuture]

Another way to prevent getting this page in the future is to use Privacy Pass. You may need to download version 2.0 now from the Chrome Web Store. [links]

[hatice23]

Completing the CAPTCHA proves you are a human and gives you temporary access to the web property. more