BillRoundsEsq
03.05.2021 1:24:22
Yes, in some cases but to maintain the warranty on your motor we recommend it be done by an Authorized Minn Kota Repair Center. Some models cannot have the shafts shortened.
See full version: How do you measure the shaft length on a Minn Kota
Yes, in some cases but to maintain the warranty on your motor we recommend it be done by an Authorized Minn Kota Repair Center. Some models cannot have the shafts shortened.
Secondly, can you adjust the shaft length on a trolling motor?
Furthermore, what is the diameter of a Minn Kota trolling motor shaft? This is the complete hinge assembly that fits most trolling motors with a round 1-1/8" diameter shaft. It fits the Minn Kota Camo, Classic, Endura, Maxxum (55 lb thrust and under), Riptide (55 lb thrust and under), Turbo, and Vector models with the Lever Lock Bracket. here
If you intend to get a new bow mount for your trolling motor, you should cut or reshape your boat bow’s front gate. Design adjustments don’t require a great deal of work – you can complete them within an hour. It’s recommended to choose an affordable way. If you want to save money while adjusting the front gate, place the trolling motor at the rear end. [links]
If you plan to go in a larger water body where you are expected to counter extreme and turbulent waves, it’s better to have a longer shaft length. In this way, you are guaranteed to have entertaining and hassle-free fishing experience. [links]
If you can’t make up your mind between two lengths, choose the longer one. When you select a short shaft’s there nothing, you can do. But, in the case of a longer one, you have the flexibility to adjust its depth upward through the depth collar adjustment. more
If you are looking to find out the current length of your shaft, it’s useful to learn the procedure of how to measure trolling motor shaft length. It’s measured from the motor head’s base to the propeller housing’s base. There are some exceptions due to the variations in manufacturing design by each brand. more
Although shaft length is a critical aspect, make sure that it is not too long or it will make it hard for you to stow.
The top of the motor has to be submerged 12” or more under the water. It makes sure that you have enough power to inhibit noisy cavitation, preventing the fish from getting scared. more
Can a trolling motor shaft be too long?
So if you’re not sure which shaft length to choose of the same trolling motor model, pick the longer one. It will be a much safer choice. [links]
This is especially true for the motors mounted on the boat’s bow, as the distance from the bow to the waterline can vary greatly from boat to boat.
Thrust or power delivered by your trolling motor is essential, but it is only one factor that will affect your boat’s performance. All this power will amount next to nothing if your trolling motor is not submerged deep enough.
You don’t want the propeller to get out of water in choppy waters or/and sucking in air from above the waterline when it is not deep enough. It will cause noise, loss of power and can shorten the life of your motor.
Measure from transom to waterline
Never connect the (+) and the (-) terminals of the same battery together. Take care that no metal object can fall onto the
battery and short the terminals. This would immediately lead to a short and extreme fire danger.
Choosing the proper shaft length is important; if it’s too short, the prop won’t be sufficiently submerged. We recommend submerging the center of the motor section at least 12 inches.* [links]
Batteries should be stored and maintained at full charge. [links]