[mgoodn2244]

Clean Up: Sea Hawk Tuff Stuff Reducer 2084 or 2044

[teff]

Here are some great tips to aid you in performing the best application of Tuff Stuff High Build Epoxy Primer. Please also consult the Tuff Stuff Technical Data Sheet for more detailed information. here

[geekmug]

Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes.

[hanalin]

TUFF STUFF Reducer 2084 is a premium quality solvent formulated specifically for reducing/thinning TUFF STUFF High Build Epoxy Primer. 2084 will reduce/thin TUFF STUFF to a slightly lower viscosity, making it easier to spray or roll when applying. TUFF STUFF can be thinned with 2084 up to a maximum of 10%. here

[johndrinkwater]

Material Safety Data Sheet (MSDS Sheet) and Safety Data Sheet (SDS) covers regulatory information including physical data, hazardous ingredients list, safety precautions, storage, handling, spill and disposal procedures, and other important safety information.

[Foam]

For detailed technical information about this product please download the documents listed below:

[Rai]

As a universal primer, Tuff Stuff can be used for corrosion protection on most metals - aluminum, bronze, stainless steel, cast iron, lead - above and below the waterline, and for priming any metal. here

[nethoncho]

Tuff Stuff is a high-build two-part epoxy primer that dries fast — enabling application of a complete barrier system and bottom paint in just two days.

[rydiamage]

Incorporating Microsheet Silicate Technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration. Tuff Stuff is extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water.

[dconradcopelande]

• Dries faster and has a longer working time than Sea Hawk S-78 High Build Primer, so multiple coats can be applied in one day
• Highest build epoxy – fewer coats needed, for reduced labor costs and less haul out time
• Can be applied at 10-15 mils dry film in one coat, using a brush, roller, airless or conventional spray
• Fills deep scratches and gouges in a few coats and can be sanded within 8 hours to a smooth finish
• Use over blistered fiberglass as a repair coat, and over unblistered fiberglass as a barrier coat
• Excellent for priming props, shafts, keels, trim tabs, thru hulls and lower units

[happymoon]

Fisheries offers discounted pro pricing, real-time inventory and same-day shipping -- as well as our solid customer service reps.

[RobertDoebler]

NOTICE OF TECHNICAL BULLETIN: “TUFF STUFF & TUFF STUFF Low VOC Primer – Reducing Viscosity for Easier Rolling” technical bulletin can be read here. here

[unavailable]

Recommended Coats: 2-4 depending on intended service.

[billyjack]

Typical Film Thickness( roller): 3.6-4.2 mils dry film thickness (DFT) per coat, (7.0-8.0 mils wet film thickness (WFT) for smoother finish.

[davidpbrown]

For detailed technical information about this product please download the documents listed below:

[Sammy T]

Tuff Stuff is an extremely high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration.