PDA

See full version: In-Line Splice Kit Transducer Cable Joiner - 6 Pin Blue Navico Cable


puddinpop
13.05.2021 3:52:49

It's solderless screw terminal connections allow field servicing of the splice without cutting or soldering. more


Need2Revolt
26.04.2021 23:45:42

Ideal for use in exposed exterior or hostile environments such as engine rooms, bilge or sailboat mast applications.


im3w1l
19.05.2021 5:30:24

The integrated cable gland provides strain relief and ensures a watertight connection. more


Tara01
29.04.2021 4:24:29

This IP67 rated waterproof connector finally makes secure in-line cable splicing as easy as stripping cable and turning a screw.


octopus
25.04.2021 21:05:44

  • Cable Gland Waterproof Connector
  • Waterproof Rating: IP67
  • Temperature Range: -40°C


Asheara
13.05.2021 3:52:49

Been there - done that. Humminbird transducers are simple and fairly straightforward to repair, and can be repaired with a little patience & TLC. Have spliced my buddy's back together at least 4-5 times (he has a couple of rambunctious kids, whose feet seem to always be in the way, and they are a tad rough on the wiring. ) Finally convinced him to re-route the wiring, which seems to have helped some, but the bottom line is that with care they can be cut, soldered, re-shielded (I use aluminum foil for the shielding), then re-sealed (tape it up with electrical tape, then coat liberally with some black RTV works fine. just let it set up a few days before trying to submerge it), with no ill effects. Have even cut the transducer open, and re-soldered the wires back into it, after the trolling motor got tangled near some shoreline, pulling the wiring completely out of the transducer. Just go slow, and work it gently. Don't want too much heat on ANY of the components. Good Luck. more


williambruss112
26.04.2021 23:45:42


vics5thor
19.05.2021 5:30:24

more


Cane
29.04.2021 4:24:29


anypromo180
05.06.2021 11:36:58

Works with 141C, 161, 323, 325, 343C, 345c, 363, 365i, 383C, 385ci, 515, 525, 535, 550, 560, 565, 570, 575, 580, 581i, 585C, 586C, 587CI, 595C, 596C, 597CI, 717, 718, 727, 728, 737, 747c, 757c, 767, 768, 777c2, 778C, 787c2, 787c2I, 788C, 858c, 931C, 937C, 957c, 958c, 1157c, HDR 610, MATRIX 10, MATRIX 12, MATRIX 15, MATRIX 17, MATRIX 20, MATRIX 25, MATRIX 27, MATRIX 55, MATRIX 65, MATRIX 67, MATRIX 77C, MATRIX 87C, MATRIX 97, PIRANHA 1, PIRANHA 2, PIRANHA 3, PIRANHA 4, PIRANHA 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 150, PiranhaMax 160, PiranhaMax 170, PiranhaMax 190C, PiranhaMax 20, PiranhaMax 210, PiranhaMax 215, PiranhaMax 220, PiranhaMax 230, PiranhaMax 240, PiranhaMax 30 [links]


adamjkok
11.06.2021 3:29:26

Hydrodynamic, Single or Dual Beam (depending on which fish finder used with), 20/60 degree, 200/83 kHz with built in temperature. 15' cable. [links]


nicklink483
31.05.2021 4:14:49

Works with 141C, 161, 323, 325, 343C, 345c, 363, 365i, 383C, 385ci, 515, 525, 535, 550, 560, 565, 570, 575, 580, 581i, 585C, 586C, 587CI, 595C, 596C, 597CI, 717, 718, 727, 728, 737, 747c, 757c, 767, 768, 777c2, 778C, 787c2, 787c2I, 788C, 858c, 931C, 937C, 957c, 958c, 1157c, HDR 610, MATRIX 10, MATRIX 12, MATRIX 15, MATRIX 17, MATRIX 20, MATRIX 25, MATRIX 27, MATRIX 55, MATRIX 65, MATRIX 67, MATRIX 77C, MATRIX 87C, MATRIX 97, PIRANHA 1, PIRANHA 2, PIRANHA 3, PIRANHA 4, PIRANHA 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 150, PiranhaMax 160, PiranhaMax 170, PiranhaMax 190C, PiranhaMax 20, PiranhaMax 210, PiranhaMax 215, PiranhaMax 220, PiranhaMax 230, PiranhaMax 240, PiranhaMax 30 here


Randallromans8
26.05.2021 3:56:37

Works with 141C, 161, 323, 325, 343C, 345c, 363, 365i, 383C, 385ci, 515, 525, 535, 550, 560, 565, 570, 575, 580, 581i, 585C, 586C, 587CI, 595C, 596C, 597CI, 717, 718, 727, 728, 737, 747c, 757c, 767, 768, 777c2, 778C, 787c2, 787c2I, 788C, 858c, 931C, 937C, 957c, 958c, 1157c, HDR 610, MATRIX 10, MATRIX 12, MATRIX 15, MATRIX 17, MATRIX 20, MATRIX 25, MATRIX 27, MATRIX 55, MATRIX 65, MATRIX 67, MATRIX 77C, MATRIX 87C, MATRIX 97, PIRANHA 1, PIRANHA 2, PIRANHA 3, PIRANHA 4, PIRANHA 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 150, PiranhaMax 160, PiranhaMax 170, PiranhaMax 190C, PiranhaMax 20, PiranhaMax 210, PiranhaMax 215, PiranhaMax 220, PiranhaMax 230, PiranhaMax 240, PiranhaMax 30 here


cdnbcguy
10.05.2021 10:10:47

Works with 1157C, 717, 718, 727, 728, 737, 747C, 755C, 757C, 767, 768, 777C2, 778c, 785 C2, 787C2i, 788c, 858C, 917c, 957C, 958C, MATRIX 35, MATRIX 37, PiranhaMax 180(tri beam only)


marcpage
18.06.2021 4:06:15

I actually have that Dremel tool! Didn't think of that or of destroying the old (broken) transducer. That makes things MUCH easier!


GoldRush
17.06.2021 9:12:53

I have a new transducer so it sounds like the solution is to beat it the hell out of there! Not a whole lot of room for leverage or access under the engine though.


franzl
09.05.2021 15:18:22

I take it you new one is also a thru hull?


LOUIECCC
01.05.2021 6:02:38

Between those plates and my fiberglass wire fish rods along with a pretty good tolerance for pain I got the new wires routed.


canvasprint
10.05.2021 4:01:48

No way to unscrew from the outside. Nothing to grab on to.